How To Identify Silver Ore Magnetic

Most precious stones belong to such formations as granitic, gneissic, porphyritic rocks, and are generally found in the débris of such; Most of the silver produced today is a byproduct of mining copper, lead, and zinc.

8 mm and 10 mm Blue Drusy Quartz OR Pierced

Can be massive, radiating, botryoidal, and micaceous.


How to identify silver ore magnetic. When a volcano erupts, the lava forms some rocks that are slightly magnetized. It is one of just a few minerals that are attracted to a common magnet. This type of hematite includes numerous tiny intergrown hexagonal plates.

If you feel an attraction, the metal you’re attempting to identify is most likely ferrous. Silver is a good thermal conductor. Goethite—the brown oxide mineral of soils and iron ore.

If an item is truly sterling silver — which is commonly referred to as “real” silver or solid silver — it will be stamped with one or more of the following hallmarks somewhere on the item (usually on the bottom): If you are testing bars, you can angle one at 45 degrees and let the magnet slide down. Observe the behavior of the magnet.

It is the most strongly magnetic mineral. Gypsum—shown in its prettiest form, desert roses. halite—also known as rock salt, this evaporite mineral sits at your table. It should slide down very slowly.

Nearly all meteorites are at least somewhat magnetic, even if only weakly. Nickel is one of the few metals that is not an iron alloy that is magnetic (5¢ us nickels are not magnetic because there made of a copper nickel alloy). Gather your materials together on a flat workspace.

1) substituting for one of the metal ions within the ore mineral's atomic structure; .925 (or higher number) lion hallmark. The earth's magnetic field has reversed several times over the past few million years, and magnetic north became magnetic south.

One way scientists chart reversals is through the magnetic striping on volcanic rocks on the ocean's floor. It is also identified by examining the other minerals found around the suspected ore deposit. The silver occurs within the ores of these metals in one of two ways:

How to identify precious stones. So if you put an ice cube on top of your silver item, then the ice cube will start to melt quickly. Colorado's state nickname is the silver state due to the large deposits of silver ore found there.

This is a form of hematite which contains significant amounts of titanium. When testing silver, you want to have a strong magnet. Or, 2) occurring as an inclusion of native silver or a silver mineral within the ore mineral.

Red brown to indian red. Some but not all steel is magnetic. Nickels melting point is 1452°c (2645°f).

This is due to the high concentration in most meteorites of iron and nickel, which are magnetic. Use a magnet to see whether the rock is magnetic. Examining the physical properties of the suspected silver ore can lead to discerning the true identity of the mineral.

Nickels density is 8.902 g/cm 3. Nickel is shiny silver when polished and is darker unpolished. Specifically a strong neodymium magnet.

Ferrous metals are those that contain iron, including raw iron, carbon steel, pure nickel, and various iron alloys. * silver has a naturally dull finish. Magnetite is very easy to identify.

The easiest way to conduct this test is to place a real silver coin and a potentially fake silver coin side by side. Hematite—iron oxide mineral of many forms including this kidney ore. Silver is not magnetic and should not have much of a recognizable pull from a magnet at all.

Silver * silver is, well, silvery colored. Silver is a precious metal located throughout the world in geological deposits. Here's how to identify silver ore.

Observe the way the magnet slides down the. How to test silver with a magnet: If it sticks or it slides very quickly, it is not silver.

Silver ore can be identified in the field by evaluating the physical properties of the suspected sample or by submerging it in water. A refrigerator magnet is excellent at identifying many steel kitchen utensils and bowls. Perform an additional magnet slide test (for silver bars) place magnet on top of the silver bar at a 45 degree angle.

Graphite—the stuff of pencils has more rugged uses too. An ice cube placed on silver will melt quicker than on iron and a little quicker than on copper. Begin by placing the magnet on top of the silver coin or bar.

This refers to globular forms of hematite. Common secondary mineral in rocks and soils. It is often found in the form of isometric crystals.

Silver is extracted from the ore by a smelting or leaching procedure. It looks slightly different than steel, though steel kitchen utensils are often mistaken for steel. If a magnet is not attracted to your rock, it’s almost certainly not a meteorite.

Another great way to test silver is to touch it with a magnet. An important ore of iron. It is a black, opaque, submetallic to metallic mineral with a mohs hardness between 5 and 6.5.

Read More


How Do You Identify Silver Ore

Any valuable item is going to have fakes. A few drops on the item will reveal some details based on the color.

1693 Swedish 5 Ore Karl XI Silver Coin Coins, Silver

When the ore looks like honey and lays flat, it is ready to pour.


How do you identify silver ore. If the acid turns bright or dark red, it is likely that you have fine or sterling silver. Unlike gold, silver rarely appears in nature in the form of nearly pure nuggets. Of course, they are especially useful if you have a piece of silver you know is pure and you are using it against a not sure pure “silver” coin or bar that has a highly imitative look and feel of silver.

Rhodochrosite and silver ore, peru: Silver is extracted from the ore by a smelting or leaching procedure. Observe the stain left on the metal.

Spotting fake silver is a great skill to have, especially if you are a coin dealer.it's also a good idea to test your own silver, just to makes sure that it's real or in the event that you want to sell your silver. How can i identify raw silver/gold ore? Heat with a cigarette lighter.

As such, most silver produced is refined from sulfide ores such as galena (lead) or chalcopyrite (copper) which contain small amounts of silver. If acid turns brown, silver is 80% silver. The light red contains arsenic in the place of antimony.

The ores of silver occur in veins traversing granitic and gneissic rocks, clay slate, mica schist, limestone, and are usually associated with the ores of iron, copper, load (galena being always argentiferous), zinc. Start by preparing a list of some of the best silver ore mines you will visit to make things convenient. Aug 08, 2011 · best answer:

Use the silver acid test to see the amount of silver content in the item. Here's how to identify silver ore. The dark colored minerals are the ones which are silver bearing, while the red and pink colored crystals are rhodochrosite, a common manganese mineral that is found in a number of silver ores.

The refiner smiled and answered, “i know the purifying is complete when i can see my reflection in the silver.”. It is also identified by examining the other minerals found around the suspected ore deposit. Scratch the piece using a metal file.

Apply french's brand yellow mustard to the surface of the item you suspect is silver. Identify pure silver with mustard. These are the wheat flour and carbon making the metal take on its identify.

Suppose you’re looking to avoid the possibility of a green hue altogether. If it starts to boil over, add some salt, however, makes sure it keeps boiling. In the raw state, silver ores are almost always found in combination with other minerals.

It's unfortunate but it's reality and silver is no exception. However, you might have to enlist the services of a competent mining professional to help you identify suitable silver ore sources. Silver is a precious metal located throughout the world in geological deposits.

Western men test for silver by heating the ore and. All silver ores are heavy, and many of them are sectile, i.e., may be cut with the knife. This is necessary to get to the underlying metal to test it with acid.

Find an inconspicuous place on the item in question and make a small scratch on the silver piece. There are fake silver coins, bars, flatware, etc. Silvers melting point is 961.78°c (1763.2°f).

Scratch the surface enough so that you can get beyond any silver plating layer. French's mustard has a high sulfur content; May 21, 2012 at 10:59 am.

My own fiery trials were only complete when my refiner’s image could be seen in me.”. Silver has the highest electrical conductivity (more electricity can pass through it) than any other metal. One definitive way to find out if you have some sterling silver or fine silver is to take it to a professional appraiser, antiques dealer, or a pawnshop.

If acid turns green, silver is only 50%. Sterling silver (stamped on the front ring at right).835: This beautiful specimen of silver ore comes from the country of peru in south america.

If the ore is too thick, use potash to thin it. The young man marveled at the answer thinking, “that is true in my life. Examining the physical properties of the suspected silver ore can lead to discerning.

Silver is a shiny grey even before being polished but develops a black film over time and has to be polished. Identifying ores of silver, copper and lead. A common european silver blend.

Most of the silver you see advertised is.925 sterling silver. Check your jewelry for various marks. You can easily find lucrative silver mining sources from around the world.

The young man left contemplating the aspects of his life still. In that case, there are other ways to inspect your silver to make sure you don’t have to experience that surprise when you take off your ring. Keep adding slowly, a bit time, until the ore thins to the consistency of honey.

Silver is generally found in serpentine, trap, sandstone, limestone, shale, or porphyry rocks, the gangue being quartz, calc, fluorite, or barite. How do you identify silver ore? Silvers density is 10.49 g/cm^3.

Sulfur reacts with pure silver, but not with most other metals. The best mines are available at. The dark red silver ore is a sulphide of silver and antimony ;

Colorado's state nickname is the silver state due to the large deposits of silver ore found there. Silver ore can be identified in the field by evaluating the physical properties of the suspected sample or by submerging it in water.

Read More


How To Identify Yellow Sapphire Rough

You can also tell if a sapphire is real by shining a light on it. Struggling to understand the info as stated atm.

Natural Montana Yellow Orange Sapphire Rough 6mm Solitaire

White sapphire rough 18ct star sapphire rough.


How to identify yellow sapphire rough. Does anyone have a pix of such a stone please. Most fake sapphires are made from glass. Hello all, having trouble identifying star sapphire in the rough, have searched a number of sites and am none the wiser.

Compare the yellow sapphire with a piece of yellow glass. But white sapphires look fabulous even in the rough. Set a streak plate flat on a table to perform a streak test.

The stone showcase milky and shiny appearance even unpolished. Lighter stones lose value quickly, deeper blues less so. Sapphire is one of the most durable gemstones used for jewelry, second to only diamonds.

How to identify yellow sapphire. (sapphire is the mineral corundum, but any red corundum is ruby, instead). There truly is a different color of sapphire to suit anyone’s taste!

Head to the sapphire gemfields of central queensland you can. The fancy sapphire colors are: Check the site to identify original yellow sapphire and to know more about peela pukhraj, yellow sapphire benefits & yellow sapphire gemstone.

Yellow sapphire rough 5ct white sapphire rough. Yellow sapphire rough has also traditionally been less costly than blue, pink, or padparadscha, so cutters don’t compromise brilliance in favor of weight retention. A sapphire whose color is a combination of orange and pink is a padparadscha, another kind of sapphire mined in sri lanka.

Mostly used for engagement rings as an alternative for diamonds. I know that when looked through the loupe i have and using a mag lite ( low tech but effective ) i can see the structure close to a hexagon. Color has the greatest influence on a sapphire’s value, and preferred sapphires have strong to vivid color saturation.

Sapphire, regardless of its color, is extremely hard. Although the yellow crystal may resemble the yellow sapphire with the naked eye, both are completely different when compared to each other. Iron content in sapphire imparts these lovely yellow hues, and heat treatment or irradiation can enhance this color.

It is the hardest mineral on earth, second to diamond. If you’d like to try your luck and find a sapphire head to rubyvale in central queensland. You can pop into the rubvale gallery and buy a cut gem or a piece of sapphire jewelry but unearthing your own rough sapphire will make your holiday souvenir even more precious.

In general, yellow glass is too big and too colorful to be real. Use this page as a reference after you have mined your gem dirt from gem mine online. Look at the color of the stone.

A star saph exhibits a asterix pattern when viewed down the c axis. Thats how i have been doing it, but when it comes to the different colors is the ardest. Each sapphire, mined from its own specific location or country of origin, may vary in color or hue.

Lie the plate flat on a workbench, table, or desk so it’s stable. In order to identify whether your sapphire is natural, synthetic or imitation, here are some ways to test your stone. Here’s a beginner’s guide to fossicking for sapphires.

If you have any questions drop me an email and i will be glad to answer your questions. This is the most valued color in sapphire. Most of the info i see is.

A streak test is a method used to find the color of a stone or mineral in powdered form. Yellow sapphires are far less expensive than their blue and pink counterparts but still quite attractive. Deep, royal blue gems are quite valuable, until they get too dark.

Much less brilliance and almost no fire compared to a diamond. To determine if a sapphire is real, hold it up to your mouth and breathe on it so it fogs up. How to identify original real yellow sapphire or pukhraj.

Then, count how long it takes for the fog to fade. While yellow glass may look similar to yellow sapphire at a glance, the two are drastically different when compared with one another. Every other color, including blue, is called “sapphire”.

It has a hardness rating of 9 on the mohs scale. The rough gemstones you see here are the same kinds found in our bags of enriched gem dirt. A streak plate is a square of unglazed porcelain that has a rough surface you can use to help identify the gemstone.

In general, the yellow crystal is too big and colorful to be real. For example, if the sapphire is light blue in color, chances are it is from sri lanka. As a general rule, the best blue rough sapphire stones come from south and southeast asia, although those from africa sometimes have pretty high quality.

When found as red corundum, it is called “ruby”. Pink, orange, yellow, green, purple, and violet. Look for tiny bubbles one of the unique characteristics of a yellow sapphire stone is the absence of any fluids or tiny bubbles in them.

Diamond is the hardest gemstone, it has hardness 10. I have found, since we have found close to 50 carats of rough blue and blue green sapphire. Ruby is the birthstone for july and sapphire is the birthstone for september.

Cheating is common in kaliyuga, for the sake of small things and profits, a person is resorting to fraud, although fraud is a fraud in the sale of all gems, but in the case of pukhraj ratna, it shows its extreme form.

Read More

f6cebc1a41f94842b8d7d63c1b4546fc elm tree madison square garden

How To Identify Different Elm Trees

How to identify trees by leaf shape. But for elm, the rings are wavy and almost look “blurry”.

995110eb6daab11580db881af625b707 slippery elm medical
Pin on Herbalism

This genus consists of 35 different species ranging from ornamental shade trees to forest trees.


How to identify different elm trees. Look for areas likely to contain thriving elm trees. Elms first appeared in the miocene period about 40 million years ago. The scotch elm, siberian elm, english elm and slippery elm are the tallest of elm trees, growing up to 132 feet.

The elm is a graceful tree, perfect for planting in a wide range of soil types, and different growing conditions. There are about 35 different types of tree species within the ulmus genus, including the american elm and the european elm. Elm trees are another ornamental tree species that are not generally appreciated for.

How do you identify slippery elm trees? There are different types of elm trees (american, chinese, winged, etc.), so there will be some differences in the bark, leaves and tree structure between them. Originating in central asia, the tree flourished and established itself over most of the northern hemisphere, including north america.

With relatively fewer trees around, spotting the huge elm tree is not challenging. There are over 60,000 species of trees that come in all shapes and sizes, from majestic cedars to smaller fruit trees and shrubs. Of the 200 species of conifers in north america, pines, redwoods, firs, spruces, larches, cypress, and cedars are the most familiar ones.

Tree shape is not a part of the tree, but it’s a distinguishing feature that can help you identify a species by providing additional information. These native elms are found in china, india, eastern siberia, and central asia. For example, american elm trees resemble a vase, and sweetgum trees have a pyramid shape.

Trees provide shade, shelter, oxygen, and many even produce fruit. Generally, elm leaves are alternated with simple, single or most commonly double serrated margins, usually asymmetric at the base and acuminate at the apex. Trees can be divided into two easily recognizable groups:

Elm trees belong to the ulmaceae family, particularly in the genus called ulmus. Maple, oak, elm, birch, just to name a few. Find out about ways to identify the different species of elm trees by looking at their bark, leaves, and other features.

The name conifer comes from the cones that grow on these trees as their form of ‘fruit.’. Elms adapt to a variety of climates and planting situations, including poor or mildly salty soil, extreme cold, atmospheric pollution, and drought. This is valuable and useful information that can help you to learn more about the elm tree and help in identifying differrent elm trees

The easiest way to identify a slippery elm tree is by peeling back a few layers of bark. All types of trees play an important role in our ecosystem. This article delves on elm tree identification by using its different parts, like leaves, bark, wood, flowers, and fruits.

Below is an image of a few elm leaves. The elm tree familty consists of 30 species of elm types. So how does one distinguish among them?

The shape of a leaf can also give clues when identifying broadleaf tree species. The greatest diversity of elm trees is in the tall, bushy trees that are classed as asiatic elms. Locating an elm tree in a park or garden is rather easy.

A summary of how to identify some of our most common trees by their leaves. Identify the elm tree by its height. How to identify a tree.

The habit of trees, meaning the form in which the plant grows, can change over time, keeping that in mind. The leaves, bark, trunk, flowers and the animals on the trees are quite helpful in identifying the elm trees. The american elm reaches a height of 115 feet, while the rock elm grows to 80 feet tall.

For most types of wood, the lines of the annual rings are relatively uniform. An elm tree will provide a beautiful shade in your backyard with its large canopy so get to know the different types of elm trees and their unique characteristics. Hopefully, you should now be able to confidently look at a leaf and name its tree!

But in the wild forest or afforested land, pinpointing an elm tree is not so easy. The elm tree grows to great heights, often with a forked trunk creating a vase profile. Elms are some of the most popularly planted ornamental trees in north america and europe.

There are so many different kinds of trees: In general, the leaves are ovate, serrated and alternate. Eight elm species are endemic to north america, and.

See the photo above to see what i mean. Identifying the different kinds of trees usually depends on examining their leaves and bark. The inner bark is very mucilaginous and a dark red color.

You will also find below a lot of wonderful facts on elm trees, including information about the elm tree species, the types of elm trees, planting information, and much more. The reason why the slippery elm gets that name, or its nickname “red elm”, is because of its inner bark. Common leaf identification shapes include ovate (egg shaped), lanceolate (long and narrow), deltoid (triangular), obicular (round) and cordate (heart shaped).

If you know there are many elm trees in a certain area and the tree matches approximate descriptions of elm trees, you probably have an elm tree. This picture has different c.

Read More


How To Identify Asbestos Linoleum

How to identify armstrong, congoleum, linoleum & other brands of resilient flooring or sheet flooring that may contain asbestos (or not) bottom line : Asbestos was molded into many different shapes and sizes to fill different needs.

1956 ARMSTRONG Vinyl Asbestos Tile Flooring AD Midf

Because linoleum was invented long before vinyl, people often refer to both types of flooring as linoleum, but there's a big difference.


How to identify asbestos linoleum. Vinyl or linoleum tiles are other clues that point towards asbestos. Asbestos in linoleum floors poses relatively little risk to humans, unfortunately, it is not possible to reliably identify asbestos in linoleum flooring by sight. Asbestos vinyl sheet flooring poses a significantly greater asbestos exposure risk than floor tiles or wallpaper.

First and foremost, don’t interact with the asbestos you’ve spotted. Whereas, vinyl is a synthetic material that didn't come on the market until the 1950s. Linoleum and vinyl are both types of resilient flooring, but apart from that, they don't have much in common.

It’s more likely that you have asbestos mastic if you have square tiles that are 9 by 9 in (230 by 230 mm) or bigger. Asbestos was used to make the lino more durable. Asbestos was used in various types of floor covering, especially from the 1960s to the 1980s.

Asbestos might be present in vermiculite insulation, paint, roof shingles, siding, and any other various types of household materials in residential or commercial. For example, sheets of asbestos were used to make up walls, and slats of asbestos were created to serve as roof tiles. As einportlandor suggests, it is best to have all three layers tested (the gray stuff, the tile and the black adhesive).

The rule of thumb is, if the vinyl or linoleum type floor is older than 15 years and you do not know what it consists of, assume it does contain asbestos. Asbestos removal in vinyl and linoleum flooring Asbestos mastic will also always be black in color.

Check the sheet flooring material to identify linoleum or to check for sheet flooring likely to contain asbestos this topic has been moved to sheet flooring inspect / test. At dominion & other canadian flooring asbestos. Examine the floor tile to determine its condition.

The most common use of asbestos was in the lining for vinyl sheets and floor tiles (also known as “lino” or “linoleum”). Click here to read more! Don’t renovate your home while asbestos is still in it.

How do you identify asbestos tile adhesive? How you can identify asbestos floor tile: To confirm asbestos, hire a contractor to test the floor for you or get a diy kit and ship a sample to a lab for testing.

Likewise, how do i know if my flooring has asbestos linoleum? To completely check, identify, and have an asbestos removal, hiring a professional one from your most trusted company is a must. A primary difference between vinyl and linoleum flooring is that linoleum is a natural product invented in the 1800s;

Asbestos was added during the production of flooring to strengthen the flooring and to increase its durability. Does tile adhesive have asbestos? What to do when you identify asbestos in your home.

Asbestos was often used as a bottom layer in vinyl tile construction as cheap insulation. Asbestos floor tile removal eh minnesota department. These pages are to help homeowners and contractors with.

Closely examine tiles for decay. Nestor, yes, it is very likely that old linoleum tiles contain asbestos, as well as the black or brown adhesive used to glue it down. Vinyl or asphalt tiles that have these colors in it have a high likelihood of asbestos fibers.

One of the main ingredients used in old asbestos tiles was asphalt, so they were primarily made in dark colors only. When inspecting the tiles, look for parts that are grayish brown, dark gray, dark brown, or black. Each mold has a different location that may be stamped with manufacturer’s information.

Even if the linoleum itself is free of asbestos, the san francisco gate warns that adhesives from the same time period also contain asbestos. Also, asbestos in linoleum asbestos watch.

Read More

4119877152385a19bb922f01ff711be3 drawer pulls cabinet hardware

How To Identify Slippery Elm Tree

The scotch elm, siberian elm, english elm and slippery elm are the tallest of elm trees, growing up to 132 feet. It exists westward to texas in the south and north dakota in the north.

Elm Tree Elm tree, Outdoor fun, Forestry

It is also thought to help with constipation and diarrhea by softening and adding smooth bulk to stool.


How to identify slippery elm tree. Leaves of both species are harvested for feeding livestock. Next, check the bark of the tree. Slippery elm bark contains a substance that becomes slick and slippery when mixed with water, hence the name.

Slippery elm is derived from the inner bark of the slippery elm tree. The bark of elm tree is distinctive in many ways. Slippery elm has many different traits, which you can look for when trying to identify one.

Slippery elm leaves start as a red color, turn to dark green, then become dull yellow in the fall. European white elm (ulmus laevis) This elm tree is known to possess one of the largest leaves;

The slippery elm tree has a range very similar to the american elm, growing in the eastern united states from canada south to northwestern parts of florida. For a young tree, the bark is somewhat smooth, while older trees have a rough texture. People take slippery elm for coughs, sore throat, colic, diarrhea, constipation, hemorrhoids, irritable bowel syndrome (ibs), bladder and urinary tract infections, syphilis, herpes, and for expelling tapeworms.

Unlike the elm tree leaves, the chinese elm leaves have double serrations on the sides of the leaves. As with all elm tree leaves, serrated margins identify these leaves. This includes the jordan lake and kerr lake state recreation areas, which have thousands of forested acres in the very heart of slippery elm territory.

Both, the ventral and dorsal part of leaves have a rough texture. There is no difference in the mucilage of the twigs or leaves, as far as i can tell. Identify the elm tree by its height.

For each elm tree picture you like, just click on the tree photo to make the elm tree image enlarge. The reason why the slippery elm gets that name, or its nickname “red elm”, is because of its inner bark. The base of the leaf is slightly asymmetrical, and the leaves may be smooth on top and fuzzy on the bottom.

English elm tree | american elm tree ulmus rubra/ ulmus fulva. For more information about slippery elm herb uses, click this article. Dutch elm disease, elm yellows, elm phloem necrosis, elm bark beetle, elm leaf beetles, elm leaf miner and verticillium wilt.

An elm tree’s bark is rough, deeply furrowed, and can range in color from light grey to dark greyish. Unlike other elm trees, the chinese elm tree has very smooth bark; Wych elm tree (ulmus glabra) wych elm tree also referred to as scots elm is a large to medium tree that reaches heights of 40 m, typically with a broad crown.

The leaves of other elms, like are the winged elm, the rock elm, and the cedar elm are smaller in size. The bark pulls away easily, even from the smallest branches. A mature slippery elm will always be taller than it is wide.

Below the elm tree pictures you will find a list of elm trees types, useful facts and info about the elm tree species along with some elm tree trivia. The inner bark is very mucilaginous and a dark red color. Sometimes referred to as a red elm, gray elm, soft elm, moose elm, or indian elm, the slippery elm gets its name from its inner bark that is both mucilaginous (slippery) and red (rubra).for the first years of having an identity, the slippery elm was misinterpreted as being an american elm tree, before it was classified as.

The tree has been used in herbal medicine in this country for centuries. The inner bark (not the whole bark) is used as medicine. Red elm leaves are long obovate with a rough upper side and a smooth, velvety underside.

Slippery elm (ulmus rubra) is a common native tree in north carolina, with most populations found in the piedmont and mountain regions. The slippery elm secretes viscous liquid through its bark and it is generally found in the eastern part of north america. As much as 7 inches in length and 3 inches in width.

The leaves of slippery elm are larger in size (about 7 inches long) than that of american variety. Given that, it’s best to harvest slippery elm bark from low branches or coppicing stumps from fallen trees. Slippery elm is a tree.

Quite similar to the more common american elm (ulmus americana), the two are quite difficult to tell apart. The american elm reaches a height of 115 feet, while the rock elm grows to 80 feet tall. Surprisingly, slippery elms do not appear on the plant lists from many of our major state parks.

Leaf shape is a clue: The easiest way to identify a slippery elm tree is by peeling back a few layers of bark.

Read More


How To Identify Asbestos Wiring

Electrical wiring insulation, such as in theatres, may contain asbestos. Asbestos was a common material used in electrical wiring insulation, which is used to prevent deadly fires in buildings.

816B/TB/2699 Bagging asbestos, Wittenoom, July 1958 http

Even if there is asbestos present in that box, i'd say the hazards of messing with the wiring are far greater than the asbestos exposure, you don't develop asbestosis from the trace exposure that would be possible here.


How to identify asbestos wiring. It is cheap and extremely effective at insulating a wide variety of different materials from heat. Vinyl or asphalt tiles that have these colors in it have a high likelihood of asbestos fibers. Here is an extensive list of common places asbestos could be located.

Employers must identify the presence of asbestos before any electrical or other work is carried out that is liable to disturb asbestos (car 2012, regulation 5). One of the main ingredients used in old asbestos tiles was asphalt, so they were primarily made in dark colors only. Generally the asbestos looks like cotton batting, sort of puffy looking and an off white color.

Asbestos insulation may be found in some fixture wires, but not in cables. For example, sheets of asbestos were used to make up walls, and slats of asbestos were created to serve as roof tiles. Each mold has a different location that may be stamped with manufacturer’s information.

This ‘work’ includes access or preparatory work, etc. Usually, the toxic fibers are too small to see in the air. Asbestos was molded into many different shapes and sizes to fill different needs.

How to identify asbestos wiring. In factories that produced asbestos panel compounds, workers added raw asbestos fibers to tar, cement, millboard and other materials, creating high levels of toxic dust in the air. It is normally found inside a fabric.

Most of the asbestos insulation you will find will be in wire and cords used in heating units of some kind. Here is an extensive list of common places asbestos could be located. How to identify asbestos in the home and the workplace.

A little reading of materials readily available online may give your concerns some perspective. If you notice that you have insulation that is falling apart in your building, have a professional inspect for asbestos. If the light bulb doesn't light up the circuit has been properly cut.

This makes them easy to inhale. Replacing it with the standard plastic wiring is necessary. Before the 1980s, asbestos was a common ingredient in the cloth used for electric wiring.

How to identify asbestos many homeowners and renovators want to know how to identify asbestos before beginning home construction. Generally the asbestos looks like cotton batting, sort of puffy looking and an off white color. Of course, we now know that asbestos is an extremely dangerous carcinogen to humans.

Turn off the circuit to a room that's suspected of having old asbestos insulated wiring. The amount of asbestos in mixtures varied. Also electrical wires in electric range tops and possibly some electric ovens and clothes dryers.

Let’s take a look at why you need to know about cloth wiring, why it is dangerous, 4 point inspection, insurance, how to identify it, cost and benefits of replacing and other issues. The finished products pose a threat to construction workers. Diseases asbestos in electrical panels and wiring can cause.

Buildings made between the 1940s and the 1980s are very likely to have used asbestos materials. When inspecting the tiles, look for parts that are grayish brown, dark gray, dark brown, or black. Even though it’s easy to identify in its natural form, it’s much harder to spot when it has been turned into other products.

The photo shown here (at left) is of old theater wiring which often includes asbestos wire insulation. Building materials, bonded asbestos, friable asbestos and additional resources. If an electrical short occurs resulting in a spark, the spark would be dampened by the electrical cloth and die out.

Natural materials are typically quite easy to identify, but not those that have been manufactured to appear in other materials. And that’s what makes asbestos such a tricky beast to manage. After turning off the circuit, plug a lamp into one of the wall sockets and turn it on to verify the right circuit was correctly turned off.

Airborne asbestos particles are capable of entering the house through light fittings, exhaust, fans, air vents, cracks and gaps, etc.

Read More


How To Identify A Drone At Night

With drones becoming more and more common everyday, it makes sense that someone would create a guide to identify the unmanned flying machines much like a bird watching chart. If you are suspicious that there is a drone watching you at night time here are some of the important factors that you can use to determine if it is a risk to your personal safety or security.

how to build a custom drone photography tools

If a drone is hovering high over your house or property at night, it will look like a blinking star but with rapid movements in different directions.


How to identify a drone at night. Dutch designer, ruben pater, has created a drone survival guide which shows the different shapes and sizes of drones based on their silhouettes. When they fly at night, drones emit lights, although these lights are often dim enough such that you may not notice any light if you aren’t watching out for it. So now that you know what a drone looks like at night, you can rest a bit easier.

Use microwave motion sensors · 2. It's not the first time that a homeowner has had a close encounter of the drone kind, and such incidents seem to be becoming more common, because the number of robotic aircraft is on the rise.the federal aviation administration projected last year that the number of small uavs owned by hobbyists would more double from 1.1 million in 2017 to 2.4 million by 2022, while the commercial fleet used. One of the first, and most useful, ways of determining if a drone is in the local area is to look into the sky for lights of a drone.

The easiest way to identify a drone at night is by looking out for its lights, which is fairly easy. Here are the various ways to spot a drone at night: The drone detection applications generally cue a ptz camera using the gps place of this drone, so the camera may pan, tilt, and zoom in the ideal region to catch a visual of this drone.

Want to know what that mysterious drone buzzing over your head is up to? Because of weather changes or changes in a year, visual detection isn’t a perfect first line of defense when discovering incoming drones. Training should include both normal drone operations and specific training on flying drones at night.

If you want to spot a drone at night, you have to look for its lights, listen for its sound, or detect its radio signal. Green and red lights on a drone can help identify direction of flight. How to fly a drone at night faa rules ken heron.

Ways on how to spot a drone at night · 1. The noise that a drone makes is very distinctive. In the porsche museum by night a camera drone encounters.

Likely the only path for drone flight over people in the immediate future (i.e., first half of 2021, at least). To distinguish between the two, consider the regularity and the color of light. Thermal drones were also used to identify people defying lockdown rules or social distancing guidelines imposed by many countries especially at night.

You can also send your own signal to the space where you suspect the drone is located and use a device to analyze the signal that bounces back to confirm the presence of a drone. If you want to spot a drone at night, you have to look for its lights, listen for its sound, or detect its radio signal. Here, you will also want to identify the training your pilots and observers have had.

Weight limit of 0.55 lb (250 g) or less. In the meantime, drone pilots may operate at night through laanc. The section on safety risk management should include identifying hazards and how you plan to mitigate them.

Skyward would be happy to help you identify the right drone and concept of operations for your needs. However, if you want to fly a drone for purely recreational. Drone requirements for category 1.

Depending on the type of drone that is being flown anywhere from a swarm of bees all the way down to a low pulsating frequency. And while radar or other radio techniques can identify a drone's presence at that range, he says only the ben gurion researchers' trick. Here, you will also want to identify the training your pilots.

I hope my article on how to spot a drone at night helped you out! By learning about federal regulations and what drones look like, you can identify if there's one hovering above you and your property. A few drones with 4k video capability meet this category.

Michel durand and john davison were loving their dream job, piloting 737s to foreign countries. Drone technology uses thermal imaging to identify feral pests on farmland. Why use flytnow for automated night surveillance flytnow enterprise for security and surveillance enables drone operators, service providers, and enterprises to remotely operate a fleet of.

Read More


How To Identify A Queen Bumblebee

One way to identify the queen from her daughters is by looking at the size. The bumblebee queen survives the winter alone and rears her first brood in early spring to establish a new colony.


It has yellow bands at the collar, rear of the thorax and at the first segment of the abdomen, and the tip of the tail is white.


How to identify a queen bumblebee. The bumblebee queen that has overwintered in a protected location constructs the nest in the early spring and begins the new bumblebee colony. They sport the same colors and share the same body type. The easiest way to identify a bumblebee is, ironically, to look at its bum.

They are black with one yellow/ochre band across the thorax and another across the abdomen. You can identify queen bee by it’s size. How to identify queen bee.

The population size varies by the bumblebee species and environmental. Their legs are wide and both have pollen baskets, which the male bumblebees don’t have. Another is that hoverflies and bees have very different eye structures.

Click on a tail colour below to identify a bumblebee: The queen is much larger than her workers. Additionally, while the other bees stand with their legs under them, the queen stands with splayed, visible legs.

In the fall, a queen will mate and then store the male’s sperm inside of her in a special chamber over the winter. One key difference is that bees have four wings and flies have two. The bumble bee is a social insect and builds a nest each spring.

It is a relatively large a bumblebee and can be found in a variety of habitats from woodlands to gardens. The european bumble bees, bombus terrestris, feral in tasmania, are large, fat and very hairy. Probably one of the largest and most common queens you will see.

Bumblebees fall into three rough groups based on tail colour: While a bumblebee nest may take shape in a tree and does involve the production of some wax, their homes don’t resemble that of any other stinging insect. Nests bumblebee nests typically contain far fewer members than honeybee nests and usually number from 50 to about 400 individuals.

Top tips for bumblebee id. Look for one yellow band on the thorax and one on the abdomen. If you are keeping bees for a while, it will be much easier for you to identify the queen bee.

To identify a queen bee, look for the largest bee in the colony as the queen will be longer and narrower than the other bees. Although generally not aggressive, bumblebees will protect their nest if threatened, so a nest in. Early bumblebee, queen (bombus pratorum) this species is small for a bumblebee with a single yellow band on both the thorax and the abdomen, though the latter may be absent, and tapers to an orange tail.

Worker bees may be 8 mm to 22 mm in length while queen bees are up to about 25 mm. European bumblebee or large earth bumblebee bombus terrestris. When that happens, catch them and have look at their hind leg to check if.

Bumblebees can be very difficult to identify at first, although they are often relatively straightforward! The queen bee is the largest bee in the colony. Here we are describing more about the steps for identifying queen bee.

A solitary fertile queen awakes from overwintering to start the new colony and carries out the initial tasks of foraging, laying eggs, and caring for preliminary broods. Also, note that the queen’s abdomen has a pointed shape while the other bees have a blunt abdomen. Bumblebees (genus bombus) are social insects, like honeybees.they live in colonies and almost always nest in the ground, often in abandoned rodent burrows.

The queen bumblebee looks very similar to her workers. In areas where they share overlapping territory, it’s easy to. Flies, for instance, have huge eyes on either side of.

With time you’ll then start to occasionally notice bumblebees that look “odd”. Like most other insects, bumble bees start as eggs that hatch into larvae, which then pupate and emerge as adults. Concentrate on learning how to identify the true bumblebees.

True bumblebee females (queen & workers) have a pollen basket on their hind leg where.

Read More


How To Identify Ac Tonnage

Air conditioning equipment age from serial number for the example above, the equipment was made after 1980. This example has digits in the 4th and.

AC WINDOW GUARD Keeping kids safe, Kids safe, Guard

The first four digits of the serial number are week and year of manufacture, in this case, week 13 of 1989.

e769a1bbcf0e97cb2e1a75dc1c1a2c5c welding wire cable

How to identify ac tonnage. Carrier a/c compressor condenser model# 38xd12400 (same unit as used for the serial number example above), there is variation in how carrier assigned these numbers but typically the numbers indicate either tonnage or mbtuh. When it comes to air conditioners, btus are a handy measurement that indicates how much heat your air conditioner can cool per hour. There are many variables that may affect the amount of tons you’ll need.

This is the lowest tonnage. For homeowners, residential air conditioners usually. Follow the link below and use the ac tonnage calculator provided by companies like carrier to get a the required tonnage for your room (more calculators can.

Air conditioning and heat pump system capacities are offered in what is referred to as tonnage. Tonnage ratings are commonly specified in increments of.5 tons. Identify the orientation of your windows and measure their sizes (don’t add up the window sizes as a north facing window impacts the calculation different from a south facing window).

If your system happens to not have the btu or the tons information detailed, identify the ac model number on the label. Most homes will need a ton for every 400 to 1,000 square meters. See air conditioner btu chart for a guide to selecting an air conditioning system with the proper cooling capacity in tons or in btus.

Divide 286,000 (amount of energy to melt a ton of ice), by 24 (hours in a day), the result is 11,917 btu’s of energy per hour to melt the ton of ice. The capacity in tons of a trane outdoor unit can be determined by dividing the 7th and 8th digit of the model number by 12. To find the tonnage of an a/c unit, start by looking on the label located on the condenser cabinet.

Just divide the btus by 12,000 to find out the tons of your ac! How to identify ac tonnage. The 024 is a 2 ton.

@ 9210188999 call our customer support: For every 12,000 btu/hr that your unit can cool, it has 1 ton of air tonnage. Click the calculate system size button.

Usually, people don't care enough to decode model numbers, but sometimes you need to know what they mean. Lets decode the trane model number from the example above: So if the model number is #4ttx4036a1000aa, take 36 and divide by 12, equaling 3 tons.

Select the region you live in according to the color keyed map below.; Model numbers, to the untrained eye, can seem a little like a foreign language. Then find the lable that provides the info about your trane ac tonnage.

The condenser cabinet can be found at the side or on the roof of the building, and the actual condenser, valves, tubing, fan and other components are inside. Use the sizing calculator below to calculate your required system size. Select the optional heating type.;

Still, each letter and number means something. The label with information about the a/c unit should be on that outside cabinet. You will see 1.5 through 5.0 ton systems listed on our site.

Finding ac tonnage from model number is very important and detrimental to the proper operational status of an air conditioning system. Enter the approximate square feet of the area in your home that you need to heat/cool.; Select the system type needed for your home.;

Most air conditioning manufacturers make it possible to identify what the tonnage is with the model number of the unit alone.some use the indoor and some use the outdoor unit.the way to tell is simple.the tonnage goes in increments of 6. Just like the nominal size of lumber or an air conditioning filter, the exact cooling capacity may be a … this means that a 1.5 ton ac can remove enough heat which can melt 1.5 tons of ice in a day. Divide the number by 12 (which represents 12,000 btu/hr, or one ton of cooling capacity) to get your ac unit’s tonnage.

If your existing system is properly sized for your home, you can shop using the sizing of your existing system. Air conditioning equipment age from serial number for the example above, the equipment was made after 1980. Simply divide the btus by 12,000 to calculate the tonnage of your unit.

An air conditioner with a capacity of 24,000 btu. This is the only contact number to speak to our customer service representative. Then contact a local hvac contractor and provide them with the model number.

Go outside to the condensing unit and look for a data plate mounted to the side. Some manufacturers bury tonnage or btu information in their model numbers. This means that residential air conditioner units are usually rated as 1.5, 2, 2.5, 3, 3.5, 4, 4.5, or 5 ton units.

If you don’t want to do the math, here are the numbers you’re looking for and their corresponding tonnage: The model number starts with 4. A simple and useful air conditioner (ac) unit tonnage calculator to calculate how much ton ac would be required for your room or house.

Read More